In The Box:D2 gauge assembly, pre-assembled output and oxygen sensor cables with connectors and Bosch LSU4.2 (part# 17014). D2 assembly includes anti-glare faceplate, black bezel, bung and LED display.
B2 gauge assembly, pre-assembled output cables and vacuum hose. B2 assembly includes black bezel, WHITE or BLACK faceplate and Red or Blue LED display. 10PSI and 60PSI faceplates are sold separately.
There are almost 100 wideband products out there. HOW ABOUT 2 THAT ARE RIGHT FOR YOU AND YOUR BUDGET?
The APSX WIDEBAND D2 & B2 COMBO
DO NOT OVERPAY FOR YOUR WIDEBAND
Featured on Super Street Online:
APSX 2 Gauge COMBO D2 Wideband Controller & B2 Boost Gauge
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
APSX D2 LED Display colors available: BLUE (default), RED, WHITE, ORANGE and GREEN
APSX B2 LED Display colors available: BLUE (default), RED
Faceplates can be BLACK (default) or WHITE
1 – Less wiring – controller on-board
2 – Simple installation – plug-and-play
3 – One of the five bright LED color options (Red / Green / Orange / Blue / White) per gauge for four configurable types of fuel (E85, Diesel, Gasoline and Methanol) and lambda display
4 - Sweeping LED "needle" indicator from rich (green) then normal (orange) to lean (red)
5 - Fail safe LOCKED connector - it is not possible to make a wrong connection
6 - Anti-glare faceplate - Non-destructable polycarbonate. Additional faces are paid extra.
7 - Multiple outputs for digital (to PC), analog (to data logger / EMS), narrowband for simulation and extra switch options
8 - On-Gauge Programming Button - No need a PC or tablet for programming upper/lower limits and other settings
1 – Analog 0-5V (9=19 AFR) linear output for engine management systems (EMS) and data loggers (MegaSquirt)
2 – Digital output is 9600 8N1 serial that can be connected to your PC
3 – Simulated NB output
1 – Displays boost in 0.1 PSI (60 PSI max) and to display vacuum in 1 In.Hg (-30 In.Hg max) increments
2 - Sweeping RED LED "needle" boost indicator from o to up to 60 PSI and single BLUE LED vacuum light
3 – Pre-assembled plug and play cable harness with built-in sensor on the gauge
4 - Black or white faceplate option
5 - Multiple outputs for digital (to PC) and 0-5V analog (to data logger / EMS)
6 - No need a PC or tablet for programming upper/lower limits and other settings
7 – LED display has day light sensor to adjust the intensity automatically
Find a vacuum source on the intake manifold side and connect it to the hose fitting provided. If needed, secure the hose with hose clamps or tie zips.